5000 Series : 5-Piece Circuit Card Retainers

Cross Reference

Easily locate American Circuit Card Retainers, Inc. products by DSCC / CID Numbers

Product Characteristics

The 5000 series of Circuit Card Retainers offer the highest locking force available for cold wall applications. They mount to Circuit Board assemblies using screws, rivets or adhesive banding and are then inserted into machined channels of cold plates or heat exchangers. The wedge design secures the Circuit Board firmly in place providing superior resistance to shock and vibration while enabling maximum thermal transfer.

Reliability - Maintains Wedge and Body Alignment via Captive Rear Wedge Design
Thermal Transfer - 5 Piece Design Provides Maximum Contact between Thermal Paths
Shock & Vibration - 5 Piece Design Exhibits a Uniform Clamping Force for Maximum Retention
Flexibility - Special Lengths, Finishes or Other Design Requirements Available Upon Request
Lighter Weight
Economical

Technical Data -- Easy Reference Guide
Series 5000
		Height (Expansion Direction)		Approx. Clamping Force
Series	Width (Footprint on PC13)	Relaxed (max)	Expand (min)	(Direct Force Between PCB and Cold Plate)	Recom. Torque Setting	Spec. Sheet
G5220	.225 (5.72mm)	.225 (5.72)	.275 (6.99)	400 lbs (1780 N)	6 inch lbs (68 N-cm)
G5225	.225 (5.72mm)	.270 (6.86)	.325 (8.26)	600 lbs (2669 N)	6 inch lbs (68 N-cm)
5260	.250 (6.35mm)	.270 (6.86)	.325 (8.26)	400 lbs (1780 N)	6 inch lbs (68 N-cm)
5260L	.250 (6.35mm)	.270 (6.86)	.325 (8.26)	400 lbs (1780 N)	6 inch lbs (68 N-cm)
5260LE	.250 (6.35mm)	.270 (6.86)	.325 (8.26)	400 lbs (1780 N)	6 inch lbs (68 N-cm)
5288	.250 (6.35mm)	.293 (7.44)	.350 (8.89)	400 lbs (1780 N)	6 inch lbs (68 N-cm)
5266	.225 (5.72mm)	.230 (5.84)	.290 (7.37)	350 lbs (1557.5 N)	6 inch lbs (68 N-cm)
5267	.250 (6.35mm)	.197 (5.00)	.236 (5.99)	350 lbs (1557.5 N)	6 inch lbs (68 N-cm)
5375	.365 (9.27mm)	.380 (9.65)	.460 (11.68)	750 lbs (3338 N)	20 inch lbs (226 N-cm)
Unit: inch (mm)